OnePlus Nord Stock Boot Image Files and How to Install Them? - Techweu

This guide describes what a stock boot image is, why you need it, and how to install it on OnePlus Nord. There were some initial questions about deviations from the company’s budget segment, and Nord has answered them all. Offering all top-end specifications without puncturing pockets, and associated OxygenOS merchandise and OEMs have checked most of the prerequisites that may have been requested. In addition, OnePlus has always been known to be a very active player in custom development.

And the Nord series is no different. Within a few weeks of launch, there were already many tweaks, mods and customizations available for this device. For some of these changes, the need for a stock boot .img file was a top priority. Working with partition files is by no means an easy task for many. And if you also echo these thoughts, this guide will help you. Today, I will explain the OnePlus Nord stock boot image file and its installation procedure.

What is a Stock Boot Image and Why is it Needed?

The boot partition (or boot.img), which consists of the kernel and ramdisk image, is the first line loaded by the boot loader when the device boots into the OS. This definition applies to all manufacturers, regardless of which manufacturer the Android smartphone belongs to. So why do we need to get this file? Well, there are many reasons for the same. Let’s start with the most basic reasons (continue to focus on the OnePlus Nord).

There are two ways to root a device, with or without TWRP. The former is much easier to run, but not all devices have TWRP builds working. In this regard, many users prefer the non-TWRP method to root their devices. The first requirement for the same is to get the stock boot.img file. This file is patched via Magisk and flushed via Fastboot. Similarly, you can use the boot.img file to undo the above adjustments.

That is, you can remove root from your device by uninstalling Magisk and flushing the stock boot.img file. In some cases, if you flush the wrong binary on the boot partition, you can easily flush the stock boot.img file to get the device up and running. So all this must have given a pretty decent idea about the usefulness of this file. Let’s review the steps to install these OnePlus Nord stock boot image files.

How to install the OnePlus Nord Stock Boot image file

There are two ways to install this partition image file. The first uses the Fastboot command and the second uses TWRP recovery. The second method is the simplest of the two, but if you want to keep a safe distance from custom recovery, you can choose the Fastboot command. That said, you should understand the requirements of this guide before proceeding with the steps to install the OnePlus Nord stock boot image files.

Prerequisites

First and foremost, it doesn’t matter which method you choose. You need to unlock the device boot loader. Enable USB debugging on the device as well. Go to Settings & gt; About Phone & gt; Tap Build Number 7 times & gt; Return to Settings & gt; System & gt; Developer Options & gt; Enable USB debugging.

Similarly, get the device stock boot.img file. & Nbsp; You can download the stock Fastboot ROM for OnePlus Nord > & Nbsp; Then extract the boot.img file from it. ROM credits to XA Recognized Developer & nbsp; mauronofrio Will be sent. >
In this regard, you only need to download boot.img for the OS currently installed on your device. If you don’t know the same, go to Settings & gt ;. Check the build number for the phone. Next, you need to download the stock firmware with the same build number to get that stock boot.img file.
Regions are also very important. Do not crossflush the boot image file. Of other areas. The region code for OnePlus Nord is: Global (AC01AA) Europe (AC01BA) India (AC01DA), Download the region code for your region.
Then & nbsp; Android SDK Platform Tools on PC & nbsp; < If you choose the li> TWRP method, be sure to use it installed. This guide should help you: & nbsp; How to install TWRP Recovery on OnePlus Nord . This guide also includes rooting steps, so you can skip it at this time.

That’s it. These were all requirements. You can now proceed to the steps to install the OnePlus Nord stock boot image file.

Method 1: Use Fastboot command
- First, rename the downloaded boot image file to boot. Therefore, the full name must be boot.img. Then transfer this boot.img file to the platform-tools folder.
- Then go to this platform-tools folder, type CMD in the address bar and press Enter. This will launch a command prompt.

Enter the following command in the CMD window to boot the device in Fastboot mode

adb reboot boot loader

If you want to flush the files to the “currently active” slot, run the following command:

fastboot flash boot boot.img

On the other hand, if you want to flush the boot image file to both slots, you need to use the following command:

fastboot flash boot_a boot.img

fastboot flash boot_b boot.img

After the flash is complete, you can reboot the device in the OS as follows:

Fast boot restart

So these were the steps to install the OnePlus Nord stock boot image via the Fastboot command. Now let’s focus on the TWRP method.

Method 2: Via TWRP Recovery

Connect your device to your PC via a USB cable and make sure debugging is enabled.
Next, transfer the boot.img file to the device’s internal storage Proceed to the next.
Navigate to the platform-tools folder, type CMD in the address bar, and press Enter. This will launch a command prompt.
Enter the following command in the CMD window to boot the device with TWRP recovery

adb reboot recovery

After launching with TWRP, go to [Install] and tap the [Install Image] button at the bottom right.

Then select the boot.img file and select the boot partition from the partition selection screen.
Finally, right swipe to install this file.

When you’re done, you can reboot your device with the OS. To do this, go to Reboot and tap System.

that’s it. These are the steps to install the OnePlus Nord stock boot image file. We shared two different ways to do the same: via TWRP and using the Fastboot command. You can choose between two things that you find easy to handle. Also, if you have any questions about the above steps, please let us know in the comments section below.